Contacting a residential electrician in Mesa for any sort of wiring job is your best choice, rather than trying to do it on your own and running the risk of injury. Arizona law requires that anyone offering their services as an electrician be registered with the Arizona Registrar of Contractors. Without a license, a contractor is in violation of several laws. However, most private citizens doing their own electrical work are obviously not covered under laws that relate to electrical contractors. While this is true, there are many other compelling reasons not to try electrical work on your own unless you are totally sure you know what you are doing.
If you want to do the work yourself, instead of working with a residential electrician in Mesa you need to be aware of any and all local codes regarding wiring work. Based on the National Electric Code (NEC) or NFPA 70, most cities in the U.S. have some sort of electrical codes in place. The National Electric Code is not legally binding, however, it is highly influential on the codes and laws of states,cities, and municipalities.
The NEC and a Residential Electrician in Mesa
The NEC provides facts about everything from wiring strength to wiring diagrams.
Considering that the National Fire Protection Agency publishes the NEC, it is considered the final word on electrical codes. Electrical permits are only provided to homes and businesses as long as public safety is not threatened. Faulty wiring poses a significant fire risk, as does improper safety measures during installation. Keep safety always in the back of your head when you do your own wiring project. If you get a permit, know that electrical codes are rigid, and thus, not guidelines.
Whatever the electrical wiring work you’re doing, you must be in compliance with or be well above the minimum requirements for your area. Above all else, make sure that you are following safety procedures. Rather than running a risk of electrical fire or damage, an even better idea is to get in touch with an electrical contractor in Phoenix.
Start with your wiring. There are a lot of different wiring types out there. Once you figure out if the wiring will work for your project, find your main breaker, and shut it off. A lot of people think that they just have to shut off the particular circuit that they’re working on, and not the entire power system, however, this can be dangerous. Shutting off the main breaker guarantees that you will be safe while you’re doing your electrical Shutting off the main breaker is inconvenient, but also guarantees your safety while trying to do any electrical work. At the very least, have all of your work inspected by an experienced residential electrician in Mesa before you switch the power back on. One of the main reasons for involving an electrician is the plethora of wiring choices, so many of which have proven to be dangerous.
Wiring Types and a Residential Electrician
In the 60’s and 70’s, in order to wire houses cheaply and quickly, corners were often cut, including using substandard wiring choices such as aluminum. When people try to connect too many electrical outlets to a circuit, it can cause outlets to overload. If it shuts off the power to part or all of the house, that’s inconvenient, but what happens if it causes a fire? Selecting the wrong gauge of wire is a potentially dangerous mistake that a residential electrician can help you to avoid. Is your product going to affect the inside of your home, or will it affect your home’s exterior? If your electrical project is outdoors, you’re going to use need NMC cables as they’re capable of being used in damp areas, and above ground. Don’t use UF electrical cables above ground as they can crack with sun exposure. Inversely, if your project is indoors, you’re going to need NM cables.
Home improvement materials often make wiring sound like a snap, but obviously it isn’t. A qualified and experienced residential electrician will be able to assist you with your project while ensuring your safety and the safety of your home.
Call (480) 926-1033 To Make An Appointment
3215 N Arizona Ave Suite B12, Chandler, AZ 85225, (480) 926-1033, info@DodgeElectric.com